Whenever the prefilled pods reach their ends, vapers have to swap them with new ones to keep vaping sessions rolling. Are you also using the famous Hayati Pro Ultra Plus 25K? Thinking about replacing the pods? This guide is for you!
Changing the pods is simple once you understand how the system works. A correct replacement process helps the kit continue working as intended. It also prevents avoidable issues such as poor flavour delivery, connection problems, or liquid flow interruptions.
The Hayati Pro Ultra Plus Pods System
The Hayati Pro Ultra Plus 25000 has a different structure compared to other pod systems. That is standard pods have one refill tank. However, this Hayati pod has two cartridges. Instead of a single chamber, the kit includes a 2ml pod setup connected with two separate 10ml auto-refill tanks. These two tanks can either be filled with two different flavours or with the same ones. In addition, it uses a twist-to-switch mouthpiece to move between these flavour chambers. Because of this design, you can’t just simply pull out one section and insert another. As a result, replacing the pods requires a few specific steps. Before getting into the pod changing process, let’s first look at what the kit includes:
- 850mAh rechargeable battery section
- USB-C charging port
- 2ml pod setup
- Two 10ml auto-refill tanks
- Dual mesh coil structure
- Twist-to-switch mouthpiece
- Battery display screen
- TPD-compliant
Remember, this is a reusable kit, so you will be using the same entire setup again, except the pods. The battery, twisting mechanism, display, etc., remain in use. You only need compatible replacement pod components to install in the kit when required.
How Long Can the Hayati pro ultra plus 25k prefilled refill pods Be Used?
The Hayati pro ultra plus 25k prefilled refill pods offers extended use with its high-puff and a large 22ml e-liquid capacity. However, the estimated 25,000 puffs vary for vapers because usage habits are different for every user. Further, factors such as puff length and vaping frequency affect how long the pods last. For instance, the pods may last a few days for heavy vapers. In contrast, it can last a few weeks for light and moderate vapers.
Even if the pods run out of e-liquid, the battery is still usable. The kit includes an 850mAh rechargeable battery. You can continue using your kit and battery by simply charging it with a Type-C cable.
Signs Your Hayati pro ultra plus prefilled pods Needs to be Replaced
Some people wait until the kit completely stops working. However, there are smaller signs that appear before replacement becomes necessary. You can keep track of them and replace the pod at the right time. Watch for:
- Flavour becoming weak
- Reduced vapour output
- Tanks appearing empty
- Burnt taste during use
- Pod reaching the end of its usable life
Replacing the pod at the right stage helps avoid a poor experience later. Many vapers continue using an empty setup for too long. In the end, the vape kit stops working, and they assume there is a technical fault. However, the pod simply needs replacing to perform again as a new setup.
Hayati Pro Ultra Plus Replacement Pods Steps
The entire process is quick. Vapers need to spend only a few minutes and follow these steps carefully.
Step 1: Pre-replacement preparation
Whether you are using the vape for the first time or just replacing the pod, charge the vape before starting. In addition, make sure you have dry and clean hands and that the vape kit is on a flat surface.
Step 2: Remove the current pod
Magnetic connections keep the pods tightly secured. Therefore, hold the kit firmly and gently pull the pod chamber upward. Avoid twisting aggressively, squeezing, or applying unnecessary pressure. Also, pulling at an angle may affect connection points. If the pod feels tight, use a steady movement instead of forcing it. If you are changing both pods at once, do the same with both pods and take them out.
Step 3: Remove all protective pieces
Open the new replacement pod package. Remove all of the stickers and rubber seals. The mouthpiece also has covers, and the tank has protection pieces. Once again, make sure you have taken even small packaging pieces out. Many replacement issues happen because a seal remains attached after installation.
Step 4: Attach the replacement pod
Make sure you have the suitable pods, Hayati Pro Ultra Plus replacement pods. Now align the pod(s) correctly with the marking of the chamber. You have two colour pods, blue and red, and there is also a number marking 1 and 2. Gently attach the right pod(s) into the chamber without pushing excessively. You will hear a click sound. This click means the pod has locked in its place tightly. Further, do not repeatedly remove and reinsert the pods unless necessary.
Step 4: Insert the pod chamber into the kit
Now insert this assembled setup back into the kit. Once you install it, you see the light on the screen shine.
Step 5: Coil priming & mouthpiece twist
Give a few minutes to let the coil saturate from the newly set pods' e-liquid. Also, twist the mouthpiece to select your favourite flavour pod.
Step 6: Start vaping with gentle puffs
The vape kit is inhale-activated. You can start vaping by simply taking the light draws.
Mistakes Users Make During Hayati Pro Ultra Plus 25K Pod Changes
Small habits during replacement can affect the overall experience. Here are common mistakes worth avoiding.
-
Pulling the pod too quickly
Fast removal places unnecessary stress on contact areas. Therefore, use gentle pressure to avoid damage.
-
Forgetting protective seals
Some users install the pod immediately after opening the pack. Check carefully before insertion.
-
Using incompatible pods
Hayati replacement pods are designed specifically for compatible systems. Different Hayati models look similar but can use different configurations. Therefore, always check product compatibility before buying replacements.
-
Starting immediately after installation
Waiting a few minutes after setup is a small step that many vapers ignore. Take a short pause to prepare the system before use.
Benefits of Using Compatible Pods for the Hayati Pro Ultra Plus 25K
Using compatible replacement pods is not only about getting the right fit. The Hayati Pro Ultra Plus 25K uses a specific pod, colour pattern, and refill structure. Therefore, choosing the correct components helps users avoid unnecessary setup problems. Compatible pods offer several practical benefits:
- Correct fit inside the setup: The pod sits properly in the battery section without forcing or adjusting components.
- Better connection between parts: The pod aligns with the contact points of the chamber correctly, which reduces connection issues.
- Keeps the flavour switching feature working as intended: With compatible pods, vapers can smoothly twist to switch to their favourite flavour pod quickly.
-
Fewer installation issues: Users are less likely to remove and reinsert pods repeatedly during setup, and save time.
Where to Buy Genuine and Compatible Hayati Pro Ultra Plus Pods?
Using genuine replacement pods ensures proper compatibility with the existing kit. Looking for replacement pods in various flavour options? Simba Vapes offers a wide range of flavour-rich Hayati Pro Ultra Plus Pods.
Many users buy replacement pods before the current setup reaches the end of its use. Keeping an extra pod pack available avoids interruptions and also gives you the option to switch between different flavour choices whenever needed. This can be useful for people who prefer variety instead of staying with a single option for a longer period. You can buy both kits and replacement pods at affordable rates at Simba Vapes.
Conclusion
Replacing pods on the Hayati Ultra Pro is not difficult. However, following the right order and the right pods makes the process easier. Remove the current pod carefully, and prepare the replacement setup correctly. In addition, give the vape kit a short waiting period before use. Vapers can swap the pods in a few minutes on their own and enjoy their vaping experience without downtime.
