Like other IVG products, IVG Pro 12 10k puffs has also won the vapers' hearts with its advanced technology and gravity-fed refill design. Still, many vapers, particularly the new ones, hesitate about getting this IVG Pro kit ready. However, getting started with an IVG Pro 12 kit setup is pretty easy. There are no complicated buttons and manual filling steps. Also, there are settings menus to learn. But don't rush just yet. The first setup still matters. A small mistake can affect how the kit works during the first few uses. Many people rush through the process, connect parts too quickly, or start using the kit before the internal components are ready.
The IVG Pro 12 pod kit follows a different structure compared to many standard pod systems. It uses a 2ml pod and a separate 10ml refill section that work together inside one setup. The refill section feeds the pod automatically while you use it after you set it up correctly.
Want to set your IVG kit up the right way? This guide explains each stage in detail. Therefore, new users can also understand the process from opening the box to charging and everyday use.
What is IVG Pro 12 and How It Works Before Setup?
IVG Pro 12 is a high-capacity TPD-compliant prefilled pod kit with a wide range of flavours. It is rechargeable and has a unique auto-refill tank mechanism. Plus, it has a replaceable pod system, which means you can simply swap a new prefilled pod in the kit. No need to buy a new kit whenever you run out of e-liquid. As a result, it eliminates frequent waste issues and serves as a more eco-friendly vape product. The vape kit also has an LED indicator.
Further, whether you use your IVG Pro 10k puffs vape every day or occasionally, it delivers the best it is famous for. Also, with its total 12 ml e-liquid capacity, vapers can easily use it for extended vaping sessions.
Ready to unbox and vape? Let’s first understand what is inside the box and the kit.
When you configure the IVG Pro vape for the first time, you get everything you need in the box. For instance, you get these main parts in the package:
- Rechargeable battery kit
- 2ml pod section (TPD compliant)
- 10ml refill container
- User manual
You have to assemble them to start vaping in minutes. Further, many first-time users think the larger container should be filled manually. That is not the case here. The refill container already works with the pod system and supplies liquid automatically during use.
Inside the smaller pod section sits a built-in mesh coil. Instead of replacing separate coil parts, the coil remains integrated into the pod structure. As the pod level drops during use, liquid transfers from the refill container into the pod chamber automatically. This reduces unnecessary steps for beginners.
IVG Pro 12 Setup Step by Step for First-Time Users
The first setup takes only a few minutes. But you have to follow the order.
Step 1: Remove all protective materials
Open the packaging and inspect each component. Now remove the
- Protective stickers
- Rubber plugs
- Mouthpiece covers
- Seals from the refill section
Both pods and the kit have stickers and seals. These protections help save the kit and the pods from damage. However, many setup issues happen because users accidentally leave small protective pieces attached.
Step 2: Charge the kit before setting it up
Always charge the kit when you are getting started with it. It applies to almost all rechargeable vape products.
Step 3: Connect the pod and refill section
Take the 2ml pod and line it up with the 10ml refill container. Now, push the two pods together firmly until they lock into place. Do not force the connection at an angle. The parts should fit naturally. Also, the clicking action is important because it activates the refill system inside the setup.
Step 4: Insert the assembled unit
Once connected, place the assembled pod unit into the battery section. Push gently until it sits correctly. When the unit snaps in, the LED indicator lights up. Also, if the pods are not making a clean contact with the kit, it shows an E2 error. If it is the case, pull and reset the pods in the kit again.
Step 5: Wait before first use
Give the setup a few minutes before taking the first puff. Don’t skip this waiting period. The liquid needs to reach the mesh coil properly for the right performance.
Otherwise, if you start immediately, it causes a burnt taste because the coil has not absorbed enough liquid yet. This mostly happens while installing a fresh pod. Therefore, pro-vapers always give several minutes for the liquid to set before first use.
Step 6: Start using the kit
Now the kit is ready to vape. Remember, the IVG Pro 12 uses inhale activation. So, no power button needs to be pressed. Take a gentle (light) draw from the mouthpiece and enjoy your vaping experience.
IVG Pro 12 Kit Setup for Replacement Pods
After the initial IVG Pro 12 kit setup, there comes a time when the 12ml e-liquid reaches the end of its use. When that happens, you need a replacement pod setup to continue using the kit and battery.
The kit is designed for repeated use, so no need to replace the complete kit each time. Also, vapers only have to purchase the replacement pods. The replacement pack includes a 2ml pod and a 10ml refill container. The process follows the same IVG Pro 12 setup steps used during first-time installation. Remove protective seals, connect the pod and refill section, insert the assembled unit into the battery device, and allow a few minutes before using it.
IVG Pro Vape Charging Guide
Your prepared kit also needs to be charged to continue vapour production at its peak. However, charging is one area many users ignore during the first few days. Also, vapers often focus only on flavour selection and forget battery management.
Battery and charging accessory
The IVG Pro Vape includes a rechargeable 1000mAh battery and uses a USB-C charging connection. Unlike single-use systems, the battery remains within the kit while the refill section gets replaced later.
The charging port is on the side of the kit. In addition, you have to purchase the charging cables, and they are not included in the box. The Type-C cables are easily available. Plus, many smartphones already rely on a USB-C charge support system. So you don’t have to worry about charging accessories.
Charging time
A complete charge generally takes around 60 to 90 minutes, depending on the power output of the charger used. Similarly, not every USB-C cable delivers the same results. So, charging time can also vary. If you are in a hurry, let the kit charge for at least 30 to 45 minutes.
Charge the kit before first use.
Before using the kit for the first time, connect the IVG Pro 12 to a USB Type-C charging cable. Giving the battery a full charge before first use helps users start with adequate power for everyday use.
How to Know When the IVG Pro 12 Kit Needs Charging
Many newer users ask whether there are warning signs before the battery runs low. Yes, there are. The kit includes battery monitoring features that help users understand remaining power.
The LED indicator also shows the real-time battery status. The flashing light signals tell a lot.
When the battery is getting low, it shows three dots like flashes, put it on recharge. Also, you will see the light when it is being charged. After a full charge, the light turns off.
Other common signs include reduced output, or the kit also stops responding during use. Thus, charging before the battery becomes fully depleted can help avoid interruptions.
Charging Tips Every Beginner Should Know
A few charging habits can help new users avoid unnecessary problems:
- Use compatible chargers and USB-C cables.
- Charge the kit before battery levels become extremely low. Keep it between 20 to 80%.
- Disconnect once charging finishes. No overnight charging for any vape product.
- Keep the charging area dry.
- Keep the charging port clean.
New vapers also assume that the battery will last through the full pod lifespan without charging again. Instead, the battery will need several charging cycles during use. Moderate users get a day or more from one charge. However, heavy use requires more frequent charging.
Common IVG Pro 12 Kit Problems and Quick Fixes
Most issues come from setup mistakes rather than hardware faults.
The pod does not seem to work.
Check whether:
- Protective seals were removed.
- Pod and refill sections clicked together correctly.
- Battery charge level is sufficient.
- Refill components are empty.
Weak flavour after setup
This usually happens when the kit is used too quickly after installation. Give extra time (around 60-90 seconds) so the liquid can move through the internal system.
Device blinking unexpectedly
Most of the time, the battery level is low. The pod connection needs adjusting, or the pod requires reinsertion. Charge the battery, reset the pods in the kit, and check.
Charging seems slow
Check the cable connection and inspect the charging port for dust or debris. Avoid forcing cables into the port. Damaged cables also affect the charging.
These steps take very little effort but can improve everyday use. If you are buying your first IVG Pro 12 pod kit, choosing genuine products matters as much as the setup itself. Simba Vapes offers original products and updated information so users can start with the correct equipment and guidance. You can also follow this guide step by step to avoid confusion with the setup. You can also browse the IVG Pro 12 10k puffs replacement pods in various flavours.
Key Takeaways
A proper IVG Pro 12 setup is mostly about following the correct order rather than learning complicated steps. Connect the pod correctly, give the internal coil enough preparation time, and pay attention to charging. Use quality cables and track the indicator for status to top your kit up at the right time and avoid interruptions.
The setup does not end once the parts click together. In fact, small, careful steps after assembly ensure a better first experience and avoid problems with your IVG Pro 12 kit.
